The Stand Alone Battery Lock (SABL) supplies incredibly convenient programming and excellent quality in a sleek, low profile, good-looking package. The programming for this device is designed after the award winning DK-26.
As with all keypads produced by Securitron, the SABL is specifically made for use in controlling the access through electrically locked doors in high volume areas. It is very easy and convenient to use, supplying the possibility of perfroming the programming from the keypad itself. This simplicity of use makes the SABL a very good choice in access control applications.
Fits in a standard ANSI 2-3/4" backset
Weatherproof keypad with true 10 digit functioning
Grade 1 lock, "Clutched" and vandal resistant
Non-handed, available with PB handle (standard), or AU handle (26D only)
55 users codes, 2 passage codes and 2 lockout codes
Request To Exit (REX) input
Remote release input via normally open switch relay
Schlage SC1 keyway.
26D finish
The Stand Alone Battery Lock is designed to use a combination of true 10 digit system operation with stand-alone convenience. It is sold with two primary parts: the keypad and the on board CPU. With the keypad stationed conveniently on one side of the door, and the CPU located on the opposite side, the SABL supplies the same level of tamper protection as the DK-26. Interfering with or even destroying the keypad will still not allow the door to be unlocked.
AA batteries (included) tested to over 100,000 cycles, two year average battery life
